Westlux Flooring Anti Slip Coating

Westlux Flooring Anti Slip Coating

Westlux Flooring Anti Slip Coating

Cement additive and Waterproofing

Westlux Flooring Anti Slip Coating

A New Binder for Surface Protection system

1. Creating Concrete Floor

2. Surface Polishing

3. Surface Protection

Impregnation System with Anti Slip and Anti Stain

Silicates

Well Known
Water Based
Alkaline
Very limited stain resistance

Silane-based (Sol/Gel)

Well Known
Solvent Based
Low Flash Point
Neutral
Limited stain

WESTLUX Flooring Anti Slip Coating

Brand New Technology
Solvent Free
High Flash Point
Neutral
Dilutable
Excellent Anti Staining Properties

Test Result - Westlux Flooring Anti Slip Coating Shows Best Anti Staining Properties

Silicate	Solvent Based Silane	WESTLUX

14 Stains	7 Stains	3 Stains

Adhesion of Westlux Flooring Anti Slip Coating on EP Base Coat

EP Coating

Westlux 6920R Coating

EP Coating + Westlux Flooring Anti Slip Coating

Adhesion [N/mm²]
Trial No.	1	2	3
Adhesion in N/mm²	4,54	5,79	5,92
standard deviation	0,26	0,68	0,39
crack structure	substrate/coating	substrate	substrate

Anti Slippery Test - DIN 51330

R Class (R9...R13)
Principle
- Concrete Plate (0,5 x 1m) treated with test substance (e.g WESTLUX 6929)
- Treatment with 200ml/m2 of specific engine oil
- Test person walking on surface while plate is tipped
- Test person decides about feeling safe

R-Class	Angle	Example
R 9	6 - 10°	indoor stairs, entrance areas, shopping area, lab
R 10	> 10 - 19°	outdoor stairs, underground parking
R 11	> 19 - 27°	outdoor stairs, underground parking
R 12	> 27 - 35°	professional kitchen
R 13	> 35°	slaughterhouse, butchery

Anti-Slippery-Test for Barefoot Area - DIN 51097

A, B, C-Class
Test procedure similiar to DIN 51330 but with soap water instead of oil

Class	Angle	Example
A	12°	changing room
B	18°	shower room, surrounding of swimming pools
C	24°	Kneipp water-treading basin

General Properties

Easy to prepare by simple mixing of ingredients
Long term storage under exclusion of moisture
Skin formation time (ca. 30 minutes)
Processing time (ca. 20 minutes)
Cured / Walkable after 24 hours
Easy to apply : Roller / Brush / Spray
Humidity essential for curing

A NEW IMPREGNATION WITH REMARKABLE PROPERTIES

1K Formulation
Deep penetration
Solvent free
Transparent
Excellent stain resistant
Scratch resistant
Color enhancing
Polishable
Easy to apply

In-homogeneous Surface Aspect After First Application

First Application.

Inhomogeneous surface after first application (drying time ~ 12hrs) due to inhomogeneous absorption

Inhomogeneous Surface Disappear with the Second Layer

Terrazo Floor was Treated Without Removing Copper/Steel Inlays

Same formulation for second treatment
Perfect surface finish
No chemical reaction expected with our material and the copper or steel

Floor Looks Exclusive with Slight Elegant Gloss